How to repair a scratch on vcr player? - home vcr repair
I have a new video, the house renovate a scratch on the big painwork had .... there anyway to fix this problem or repair somewhere?
Friday, February 5, 2010
Home Vcr Repair How To Repair A Scratch On Vcr Player?
1 comment:
That sucks. Well, there are several methods for repair. Ultimately, it depends on the severity of nowhere. There are also some other units, such as the shaded area is made of plastic or occur zero, in the front panel.
If the scratches on the current coverage of metals in general, then you can try:
A) If zero is moderate, try lacquer thinner for zero plastic or real vehicle, both at local stores cars party. These methods can remove the scratches or reduce the appearance. Applying the same method if the stripes on the front, but only on the zero to concentrate and do not apply too much polish and get into the cracks around the buttons and so on.
B) If the scratch is severe, have a fine sandpaper, lightly Car Dent zero fees and a paint pot (most likely - the silk color, but the staff can better assist you). You must remove the lid, which contains zero, because (the VCR and give it back with extra fine sandpaper to zero).Wash and dry Clean entire surface with a soft cloth and soap and let dry. The flexible seal to zero and let dry. With the same pressure on a sheet of fine sandpaper, sand the putty until it seems that it is new only in the cement from the ground. Blow off the entire area to remove remaining dust and dirt. Run your finger to see if the cement layer and check the imperfections. Finally, to the fine droplets of color cover (with instructions) on the chest. Step back and enjoy!
If all else fails, or if you demand that I ... give or sell your current and buy a new unit, such as video players are very cheap in these days of the revolution of the DVD and Blu-ray. If you see any money, like me, you can use a second hand and works great.
Post a Comment